E20-597 EMC exam dumps

Calriion solutions specialist exam Certification training has become so popular today that you will often find many Calriion solutions specialist exam Certification courses and online Calriion solutions specialist exam Certification training resources being offered in your city, regardless of where you live on this planet. To become an Calriion solutions specialist exam Certification Professional, you will need to learn all the Calriion solutions specialist exam Certification test objectives. Study them with the use of an Calriion solutions specialist exam Certification guide and then test and evaluate your knowledge via our leading edge Calriion solutions specialist exam Certification training resources.

Now there is no necessary for you to worry about this exam. testpassport are striving hard to provide you the complete balanced formulation to pass E20-520 exam successfuly. We aim that you get the E20-520 exam full information that is actually required to pass this E20-520 exam. So our testpassport E20-520: Calriion solutions specialist exam exam dumps which are prepared by our testpassport E20-520 professionals. Our E20-520 test engine is quality controlled and most updated edition and the most unique of all is the E20-520 practice test questions which provide you with the online examination experience. So it is clear that with the largest resource of certification testpassport materials it’s easy to achieve a brilliant career in information technology field.

Related Exam and  100% guarantee you passed exams: e20-455 , E20-097 ,  E20-322 , E20-340 ,  E20-510 ,  E20-540 , E20-590 , E20-593 ,E20-597 , E20-670 ,E20-815 , E20-616 , E20-817 , E22-315 .

7. Which port would you use to Telnet directly into the CLARiiON?
A. Comm Port RS-232
B. Management LAN
C. Service LAN
D. SPS Serial Port RS-232
Answer: A
8. According to EMC best practice, what is the proper sequence for powering up a CLARiiON array?
A. Power on SP A and then power on SP B
B. Power on the master switch and then power on each SP
C. Power on the master switch; both SPs will power on automatically
D. Turn on the power switch for each SPS and then power on the master switch
Answer: D
9. What is the first thing you need to know when starting the Initialization Utility?
A. Domain that the array is apart of
B. IP address of Management Port
C. Serial number of the array
D. Version of FLARE on the array
Answer: C
10. What is the correct command to add user security?
A. naviseccli -AddUserSecurity -scope 0 -user -username -password mypass
B. naviseccli -AddUserSecurity -password mypass -scope 0 -user username
C. navicli -AddUserSecurity -scope 0 -user -username -password mypass
D. navicli -AddUserSecurity -password mypass -scope 0 -user -username
Answer: B
11. What is the correct command to delete user security?
A. navicli -RemoveUserSecurity -scope 0 -user -username -password mypass
B. navicli -RemoveUserSecurity -password mypass -scope 0 -user username
C. naviseccli -RemoveUserSecurity -scope 0 -user -username -password mpass
D. naviseccli -RemoveUserSecurity -password mypass -scope 0 -user -username
Answer: D
12. What is the function of IP address filtering?
A. Restricts access to iSCSI ports, EMCRemote, and communication between SPs.
B. Restricts access to Navisphere Service and Serial ports.
C. Restricts access to specific management clients.
D. Restricts access to the Loopback Address.
Answer: C
13. Which access will be restricted by using IP address filtering?

A. CIMON debug menu
B. CIMON debug
C. iSCSI ports
D. Navisphere Service
Answer: A
14. IP address filtering restricts access for Navisphere Manager, Navisphere Express, and Navisphere
Secure CLI. Which access does it allow?
A. Access to iSCSI ports, EMCRemote, and communication between SPs
B. HAVT Reports and CIMON Debug
C. Navisphere Management Ports and EMCRemote
D. Navisphere Service, serial ports, and Navisphere Management Ports
Answer: A

For more information  go here, you can get more information.

1. Click the Exhibit button.
The attached diagram shows the front of a new CX700. One of the disks in the CX700 is highlighted.
Based on the standard cabling format, which disk is highlighted?

A. 1_1_6
B. 3_0_6
C. 3_0_7
D. 4_1_6
Answer: B
2. You have been asked to attend a presales
meeting with a client. During the meeting, the client begins
to ask questions about SAN switches. The client specifies that they want a SAN switch which can
associate “user friendly” names with WWPNs for zoning. Which SAN switch provides this functionality?
A. DS16B3
B. DS24B3
C. DS24M2
D. DS32M2
Answer: A
3. Your customer attached its host to a CLARiiON through an ED64M
switch. The host HBA is not logging
into the fabric. Assuming no hardware problems, good cables and a properly configured host, what is the
most likely problem?
A. FCAL
bit setting enabled
B. Switch port for host is disabled
C. Port speed on switch improperly set
D. UPM card in secure lockdown mode
Answer: B
4. After attaching a Solaris host to a CLARiiON using PowerPath, you wish to see the status and number
of the paths per device. What is the command?
A. powercf i
B. powermt config
C. powermt config dev=all

D. powermt display dev=all
Answer: D
5. A small business purchased an CX500 with a pair of DS24M
switches. The company did not purchase
Connectrix Manager. Which methods can be used to manage the switches?
A. Telnet, Web Tools
B. Telnet, Embedded Web Server
C. Embedded Web Server, Web Tools
D. DSM
Connect, Fabric/Device Manager
Answer: B
6. WS, Inc. plans to implement a firewall between the CLARiiONs and the management host in the data
center. Which ports must be opened in the firewall?
A. 80, 433, 2189, 2190
B. 80, 433, 2191, 2192
C. 80, 443, 6389, 6391
D. 80, 443, 6391, 6392
Answer: C

if you need more you can visit testpassport.com for help ,and you can go to my blog:  http://www.e20-340.com/post/40.html

8. According to EMC best practice, what is the proper sequence for powering up a CLARiiON array?
A. Power on SP A and then power on SP B
B. Power on the master switch and then power on each SP
C. Power on the master switch; both SPs will power on automatically
D. Turn on the power switch for each SPS and then power on the master switch
Answer: D

9. What is the first thing you need to know when starting the Initialization Utility?
A. Domain that the array is apart of
B. IP address of Management Port
C. Serial number of the array
D. Version of FLARE on the array
Answer: C

10. What is the correct command to add user security?
A. naviseccli -AddUserSecurity -scope 0 -user -username -password mypass
B. naviseccli -AddUserSecurity -password mypass -scope 0 -user username
C. navicli -AddUserSecurity -scope 0 -user -username -password mypass
D. navicli -AddUserSecurity -password mypass -scope 0 -user -username
Answer: B

Clariion solutiongs implementation(E20-340) belongs to one of the Implemenation certified test, if needs to obtain the Implemenation certificate, you also need to participate in other related test, the details you may visit the Implemenation certified topic, in there, you will see all related Implemenation certified subject of examination.